Hydrogen Cleaning Engine Carbon Machine With Electrolytes For Car
Engine System
HHO Carbon Cleaning Machine Maintenance precautions:
1. Although the device is easy to operate, it will be learned.
However, please be sure to read the operation process of the
machine carefully before using it or perform the operation training
by special person before operating the equipment.
2. It is forbidden to touch the internal circuit system of the
device by hand or by using any conductive object before
disconnecting the power supply.
3. It is forbidden for non-professionals to disassemble the
equipment without authorization. If there is any problem that
cannot be solved, please contact our professional staff in time. If
the fault is not resolved in the telephone, you can apply for
return to the factory for repair.
4. Equipment needs to be cleaned and maintained regularly. It is
recommended that the user clean and maintain the equipment
regularly, and carry out a large maintenance in half a year. The
specific maintenance contents can be communicated with the
technical staff of our company according to the actual working
conditions of the equipment.
What Is HHO?
Engine Carbon Cleaning Machine, also known as the hydrogen-oxygen
generator, is a device that produces hydrogen and oxygen by
electrolysis of water. The hydrogen-oxygen generator rectifies and
converts the power frequency (alternating current) into direct
current, and decomposes in Electrochemistry alkaline water (H2O) in
the electrolytic cell to form hydrogen ions (H+) and hydroxide ions
(OH-), wherein hydrogen The ions move toward the cathode surface of
the electrode plate to form hydrogen gas (H2), and the hydroxide
ions move toward the anode surface of the electrode plate to form
oxygen (O2).
Parameters:
| Model Number | HO-1500 |
| Voltage | AC 110V~380V single phase |
| Frequency | 50/60HZ |
| Rated Power | <6KW |
| Gas Output | 1500L/h ±10% |
| Working Pressure | ≤0.2 Mpa |
| Weight | 123kg |
| Size | 600*600*1100mm |
| Package Dimension | 630*675*1270mm |
| Ambient temperature range | 5°C~50°C |
| Application | Vehicles engines |
| Usage | Car carbon cleaning |
| Color | Blue |
Engine flame out processing operation guide
Note: If the engine is abnormally extinguished in the middle, it is
forbidden to restart the car. And proceed as follows.
1. Immediately pull out the air pipe connected to the engine.
2. Turn off the main power switch of the hydrogen and oxygen
removal machine.
3. Inject compressed air into the intake system through the engine
vacuum tube for 3 minutes and let the vehicle stand for 5 minutes.
4. After resetting the air pipe of the car engine, start the car
and idle for one
minute to check if there is no abnormality and then turn off the
engine.
5. Continue to remove carbon according to the work of the Engine
Carbon Cleaning Machine.
