HHO 220V Automotive Carbon Cleaner Car Engine Cleaning Products
How to use the Machine:
1. Turn on the power supply switch on the rear of the carbon
cleaning machine.
2. Connect the gas outlet pipe with the intake manifold(air filter
or brake vacuum tube).
3. Select the engine capacity according to the car and the
operation mode(negative pressure or vibration mode)
4. Start the car and keep it running at idle speed.((Danger
Notice:Ban stepping the gas during carbon removing!)
5. Set the carbon cleaning time(usually 30 mins).
6. Click the ‘Start’ on the screen then begin carbon cleaning.
7. When hearing the buzzing sound, the machine finished engine
carbon cleaning.
8. Turn off the power of the machine, then turn off the vehicle,
pull out the gas outlet pipe in the end.
9. Restore the car line.
10. Start the car, step on the throttle at a constant speed until
the speed is at 3000-3500 rpm and then release it,and do it again
after 3 seconds. This was repeated 6 times. Until the moisture and
dirt in the exhaust pipe are discharged, the carbon removal is
finished.
The Main Advantages Compared With Others:
1. Easier Operation: There is a HD touch screen and the user can
operate it easily.
2. Alarm Causes And Solutions Displayed on the screen.
3. 13 types of safety technology to ensure the safe while using,
such as the the anti-flashback system is adopted Industry Multiple
function Dry Anti Backfire System, which will not cause the the
hydrogen return back into the machine so as to keep the machine
works at a safe environment.
4. Emergency button: When there is something out of control, the
user can stop the machine by pressing the emergency button on the
right side of surface.
Main Technical Data:
| Model Number | HO-1500 |
| Voltage | AC 110V/220V/230V/380V |
| Frequency | 50/60HZ |
| Rated Power | <6KW |
| Gas Output | 1500L/h ±10% |
| Working Pressure | ≤0.2 Mpa |
| Gross Weight | 123kg |
| Size | 600*600*1100mm |
| Package Dimension | 630*675*1270mm |
| Ambient temperature range | 5°C~50°C |
| Usage | Carbon cleaning |
Our Support:
1. We can provide all the customer the OEM service if you have your
own logo and brand.
2. We also can meet the requirement of ODM because we have our own
factory and professional engineer group. All the design can be
discussed with our engineers or you can offer us the technical
drawing. The design drawing is confident.
3. We can provide the free training for marketing, operating and
maintaining of this machine.
4. Offering the free materials for the distributor to deal with the
business.
