Engine Fuel Injector Tester Machine Fuel Injector Testing Machine
Personal Design
Description
When the quality of gasoline is poor or the vehicle is running for
a long time, if the injector is not cleaned for a long time, the
clogging phenomenon will be more serious, causing poor engine fuel
injection, poor fuel injection angle and atomization, resulting in
engine idling and acceleration. In the case of full-load working
conditions, the engine power is reduced, the fuel consumption is
increased, the pollution is increased, and the engine is not
working. Therefore, the injector should be carefully cleaned
regularly to ensure it works well.
Preparation
1) Remove the injector from the vehicle engine to check the o-rings
inside for damage. Replace the damaged 0-ring with another same
type 0-ring to avoid leakage during testing. Put the outside of
injectors in gasoline or detergent, and wipe them with soft cloth
after cleaning the outside oil sludge carefully.
2) Check the liquid level and refill test liquid when necessary.
Fil1 the test liquid through the filler on the side of the unit and
observe the liquid level in the fuel level viewer. In most cases,
filled the liquid up to1/2 of the tank capacity.
3) Turn on the power switch on the right of the Cabinet.
4) Fill ultrasonic detergent into the ultrasonic cleaning launder
so that the needle valve of the injector is covered by the
detergent.
5) Connect the injectors with the right couplers.
Note:Test liquid and detergent are provided by user self. The test
liquid is used for uniformity/sprayability test, leakage test,
injecting flow test and Automatic Test. The mixture of fuel and
detergent is used in on-vehicle cleaning. The ultrasonic cleaning
uses special injector detergent.
Parameters
| Product name | Injector cleaner and tester machine |
| Voltage | AC 220V±10% |
| Power | 230W |
| Relative humidity | <85% |
| Net Weight | 27kg |
| Ambient temperature range | -10°C~40°C |
| Dimensions | 390mmx400mmx500mm |
