Weight 38KG Catalytic Converter Cleaning Machine Engine Carbon
Cleaner With Endoscope
Product Introduction:
The model TD-501 Engine depth carbon removal washing machine
developed by our company, combining with the most effective carbon
remover, is the best machine to dislodge the engine fouling. It can
be combined with regular vehicle maintenance and special carbon
removal repairs and no need to disassemble the engine. It can clean
carbon for five engine system parts: Three way catalytic converter,
combustion chamber, fuel system, spark plug and intake valve. But
it’s work needs the special cleaning agent for carbon cleaning, so
during the process there will be some chemical gases exhaust
through the pipe.
Specification:
| Model Number | TD-501 |
| Product Name | Engine carbon cleaning machine |
| Voltage | DC 12V |
| Rated Power | 150W |
| Working Pressure | 0-1.6 Mpa |
| Weight | 38kg |
| Size | 43*40*100cm |
| Package Dimension | 47*41*110cm |
| Ambient temperature range | -5°C~50°C |
| Endoscope Pixel | 1.3 millions |
| Package | Wooden case |
| Working medium | Chemical cleaning agent |
| Application | Gasoline car engines |
| Usage | Car engine carbon clean |
| Color | Red/Green |
| Type | Other car care product |
The cause of carbon increased:
There are many reasons for increased carbon deposition: incomplete
combustion, poor oil quality, bad driving habit, low speed driving
for a long time, poor air quality etc. The increased carbon deposit
will heavily effect the vehicle performance, resulting in 90% of
engine component failures, fuel consumption increased, excessive
exhaust emission.
The cleaning methods of Combustion chamber
1. Inject the cleaning agent
(1) open the injection cap and add a proper amount of cleaning
agent to tighten the bottle cap.
(2) remove the spark plug of the automobile engine (the spark plug
can also be cleaned with cleaner)
(3) the cleaning machine connects the air source, adjusts the
pressure of the regulating valve to 2Kg/cm, adjusts the valve to
the foaming position, and inserts the foam pipe into the combustion
chamber from the spark plug mouth. Turn on the switch, the cleaning
agent foam into the combustion chamber, can be filled, in turn each
cylinder filled, immersion 5-10 minutes, (Do not wash in a long
time, if necessary, there can be a secondary cleaning)
2. The recovery of Waste liquid
(1) insert the return pipe into the bottom of the combustion
chamber and transfer the valve to the recovery position, then the
internal cleaning agent can be pulled back to the machine, each
cylinder is carried out in turn, and the combustion chamber is
blown dry with the air gun.
(2) the recovered waste liquid can be discharged by opening the
drain valve in the side of the machine.
3. Cleaning up and restoring
(1) after the combustion chamber has been cleaned, it can be filled
back to the spark plug and accessories.
(2) when engine inspection is started, the inspection should be
stopped immediately if there is something unusual.
